Features
- Sun SPARCstation Compatible
- Single Sbus Slot
- Continuous Input or Output
- Rates to 10 megabytes per second
- Supports Sbus 16-byte Burst mode
- Supports buffered block modes with internal FIFO
- Programmable Control Signal Configurations
- 4 gigabyte DVMA Addressing
Description
The S16D provides a high speed, 16 bit, continuous data 1/0 interface for SBus computers. This interface is used for computer to device connection where speed and continuous processing are essential. The S16D will support 10 megabyte per second transfers to computers or devices which can support that role.
Applications
The S16D may be used to enable the transfer of data to or from the SPARCstation. Typical applications include A-D and D-A converters, telemetry systems, and video systems.
Software
A standard SunOS loadable device driver for the SPARCstation is included with the S16D. The driver provides access to the S1 6D through standard and the S16D is provided with a minimal FCodes PROM For identification only. User FCode PROMS may be develpoed for specific applications.
Options
- Device driver source code
- Precision impedance cables in 7, 25, and 50 foot lengths
- Cable adapters
- Loopback diagnostic connector kit
Specifications
SBus Compliance
2, 4 and 16 byte transfers
32 bit Memory
25 MHz Clock Rate
Level 5 Interrupt
Fujitsu FCN-2341P096-GO connector or
Honda PCS-96MD connector
SBus Registers
DMA Address
DMA Count
Config
Control/Status
Data In
Data Out
Host Interface
Environmental
Temperature:
Operating: 10░ to 40░ C
Nonoperating:-20░ to 60░ C
Humidity:
Operating: 20% to 80% noncondensing @ 40░ C
Nonoperating: 95% noncondensing @40░ C
Physical
Single standard SBus slot
Dimensions: 3.3" x 5.780n x 0.5"
Weight: 6oz
Power
2A @ 5 volts
Software
Software drivers for Sun OS, versions 4.0.3 and 4.1
Standard read/write system call support
Asynchronous 1/0 support for continuous transfers
SPARCstation is a trademark of Sun Microsystems, Inc.
Comments about this web page? Send e-mail to webmaster@edt.com